Haylo Contracting
Custom Deck Builder in Spruce Grove and Parkland County
Haylo Contracting

Custom Deck Builder in Spruce Grove and Parkland County

We design and build residential and commercial decks that stay level through Alberta freeze-thaw. Composite or pressure-treated, on concrete footings or helical piles, built to code depth and permitted where required.

Get Your Free Quote(780) 221-5815
0+Years Experience
0Towns Served
What we build

What does decks involve in the Spruce Grove area?

Haylo Contracting designs and builds residential and commercial decks that stay level through Alberta freeze-thaw cycles, using composite or pressure-treated lumber on concrete footings or helical piles built to code depth and permitted where required. Scott Pinder, the owner and lead builder, brings more than fifteen years of hands-on experience to every project, and the company has been operating in the Spruce Grove area since 2022 with a focus on clear communication and code-compliant workmanship.

The process begins with a site visit where we listen to how you want to use the space, measure the footprint, and discuss material options that suit your budget and maintenance preferences. From there we prepare a detailed design, handle all permit applications with the local municipality, and schedule the foundation work so that footings reach the required frost depth or helical piles are installed to the engineered specifications. Framing follows using galvanized hardware, then decking boards are laid with proper spacing for expansion, and railings, stairs, and lighting are added before a final inspection confirms everything meets Alberta building code.

Alberta’s climate demands specific construction details, so we use pressure-treated lumber rated for ground contact, composite decking with hidden fasteners, and drainage membranes that direct water away from the structure. Footings are poured to the minimum frost depth for the region, and helical piles are driven to the required torque to resist uplift during freeze-thaw cycles. These choices keep the deck stable, reduce long-term maintenance, and protect your investment through harsh winters and hot summers.

Choosing an owner-operated builder means you deal directly with the person who oversees every crew member, material delivery, and inspection. Scott is on site for critical stages, answers questions in real time, and stands behind the work with a written warranty that covers structural integrity and finish quality. Because permits are managed in-house, there are no surprise delays or hidden fees, and the project timeline stays transparent from start to finish.

We serve homeowners and businesses throughout Spruce Grove, Stony Plain, Parkland County, Edmonton, and the surrounding Tri-Region of Alberta, traveling to each job site with the same level of preparation and care. Whether the project is a modest backyard platform or a multi-level commercial terrace, the same standards for code compliance, frost-depth foundations, and clean communication apply.

If you are ready to add a durable, code-approved deck to your property, reach out for a free quote and we will walk you through the next steps together.

Residential Decks

Residential Decks

We build backyard decks in composite or pressure-treated wood, on footings set below frost depth so the deck stays level through Alberta winters.

Commercial Decks

Commercial Decks

We build durable commercial deck and patio structures with clean railings and materials chosen for traffic and longevity, permitted and built to code.

Our process

How does the process work, from first visit to final walkthrough?

01

Free consultation

We visit the site, talk through your goals and budget, and note anything that affects scope.

02

Written estimate

You receive a clear, itemized quote so you know what is included before any work starts.

03

Permits and planning

We handle development and building permits, drawings, and scheduling for your municipality.

04

Build and finish

We construct to Alberta code, coordinate inspections, and keep you informed to the final walkthrough.

Start planning

Get a rough idea of your build

Tell us what you are planning and we will bring real numbers to a free site visit. Every build is priced on its own site conditions, so we quote rather than guess.

What are you building?
350 sq ft
1501,200 sq ft
Your project

Deck · 350 sq ft

We price deck work for composite or pressure-treated decking with railings and stairs on frost-depth footings.

Rather than show you a number we cannot stand behind, Scott will walk your site and put a written, itemized figure in your hands.

Book a free site visit

No obligation. Your written quote is free.

Questions

Decks questions

Usually yes, once the deck sits above a certain height off the ground. Most municipalities and Parkland County require a permit for decks roughly 24 inches or higher above grade, and attached decks often need one regardless. Requirements vary between Spruce Grove, Stony Plain, and the county. We confirm the rule for your address, prepare the drawings, and pull the permit so your deck is inspected and compliant from the start.

Deck footings must reach below the frost line so winter frost cannot heave and tilt the deck. In our region that commonly means digging well past a metre, often around four feet or deeper depending on soil. Footings set too shallow will frost-jack and lift over a few winters, leaving a deck that sags and pulls away from the house. We build to code depth so your deck stays level for the long run.

Both work well in Alberta, and the right choice depends on budget and maintenance preference. Pressure-treated wood costs less up front but needs cleaning and staining or sealing every couple of years to survive our sun and freeze-thaw cycles. Composite costs more initially but needs only occasional washing and no staining, and many owners recover the difference over time in saved maintenance. We will walk you through the tradeoffs for your situation.

Helical piles are steel posts screwed deep into the ground as an alternative to poured concrete footings. They install quickly, reach below frost without curing time, and perform well in unstable or high-moisture soils that are common on some acreage sites. Concrete sonotube footings are often the economical choice on stable soil. We assess your ground conditions and recommend the footing type that gives the most stable, long-lasting deck for your yard.

Deck cost depends on size, height off the ground, material choice, and railing style. A large elevated deck needs more footings, framing, and stairs than a low ground-level platform, so height and square footage matter a lot. Composite decking and glass or aluminum railings raise the price above basic pressure-treated wood. We give you an itemized estimate so you can adjust size, materials, and features to match your budget.

Most residential decks take a few days to a couple of weeks of on-site work, depending on size, height, and complexity of railings and stairs. Permitting and footing inspections can add lead time before construction begins, since the inspector often needs to see the holes before concrete or piles go in. We schedule around the required inspections so the build moves smoothly without waiting on approvals mid-project.

Decks can be built through most of the year here, but spring through fall is easiest for digging footings and pouring concrete, since frozen ground and deep snow complicate excavation. Helical piles extend the workable season because they do not rely on curing concrete. If you want your deck ready for summer, booking in late winter or early spring is smart, as builder schedules fill up quickly once the weather warms.

Alberta sun, snow, and freeze-thaw are hard on decks. Wood decks last longest when you clean them yearly and re-stain or reseal every two to three years to protect against UV and moisture. Keep snow cleared with a plastic shovel to avoid gouging, and clear debris from between boards so water drains. Composite decks need far less, mostly seasonal washing. We can advise on the right maintenance routine for the material you choose.

Explore other services

Visit or call

Haylo Contracting Ltd

  • Spruce Grove, AB
  • (780) 221-5815
  • Monday to Friday, 7:30 AM to 5:00 PM. Closed weekends.
Free Quote

Ready to build with Haylo?

Tell us about your project and we will book a free site visit and prepare a clear, itemized quote. No obligation.

Build your project(780) 221-5815