Haylo Contracting
Fence Installation in Spruce Grove and Parkland County
Haylo Contracting

Fence Installation in Spruce Grove and Parkland County

Haylo builds residential and commercial fences set to proper Alberta frost depth so they stay straight for decades. Wood, vinyl, or chain link, placed on your legal property line with the right permits.

0+Years Experience
0Towns Served
What we build

What does fences involve in the Spruce Grove area?

Haylo Contracting builds residential and commercial fences that are set to proper Alberta frost depth so they stay straight for decades, using wood, vinyl, or chain link placed on your legal property line with the right permits. Scott Pinder, the owner and lead builder, brings more than fifteen years of hands-on experience to every project, and the company was founded in 2022 with a focus on clear communication and code-compliant work. When you choose Haylo you get a single point of contact who knows the local soil, the seasonal freeze-thaw cycle, and the municipal requirements that keep a fence standing through harsh winters and hot summers.

The process starts with a site visit where we walk the property, confirm the exact boundary, and discuss the style, height, and material that fits your needs and budget. Next we prepare the permit package for the appropriate municipality, whether that is Spruce Grove, Stony Plain, Parkland County, Edmonton, or any surrounding Tri-Region community, and we handle all submissions and inspections on your behalf. Once permits are approved we mark the layout, dig post holes to the required frost depth, set pressure-treated or galvanized posts in concrete, and install the chosen panels with precise alignment and proper drainage gaps. The final walk-through includes a review of gate operation, hardware function, and a written summary of maintenance tips for the Alberta climate.

Choosing an owner-operated Alberta builder means the person who quotes the job is the same person who oversees the crew, orders the materials, and signs off on the final inspection. Scott’s reputation depends on every fence staying plumb, so there is no hand-off to a subcontractor who might cut corners on footing depth or skip a permit. This direct accountability reduces the risk of costly re-work, ensures that Alberta Building Code requirements for wind load and frost protection are met, and gives you a single phone number for questions throughout the project and after completion.

Material selection is tailored to the local environment. Pressure-treated spruce or cedar is kiln-dried and sealed to resist moisture absorption during spring thaw, while vinyl panels are formulated with UV inhibitors that prevent brittleness under intense summer sun. Chain link options use hot-dip galvanized steel with a polymer coating that stands up to road salt and freeze-thaw cycles. In every case the posts are anchored below the frost line, typically four feet deep in this region, and backfilled with compacted gravel to promote drainage and prevent heaving.

Haylo serves homeowners and businesses across Spruce Grove, Stony Plain, Parkland County, Edmonton, and the broader Tri-Region of Alberta, bringing the same level of detail to a backyard privacy screen as to a commercial perimeter fence. Because we manage the permit process locally, we know the specific setback rules, height limits, and inspection schedules for each municipality, which keeps the timeline predictable and avoids surprise delays.

If you are ready to define your property line with a fence built to last, reach out for a free quote and let us show you how straightforward the process can be.

Our process

How does the process work, from first visit to final walkthrough?

01

Free consultation

We visit the site, talk through your goals and budget, and note anything that affects scope.

02

Written estimate

You receive a clear, itemized quote so you know what is included before any work starts.

03

Permits and planning

We handle development and building permits, drawings, and scheduling for your municipality.

04

Build and finish

We construct to Alberta code, coordinate inspections, and keep you informed to the final walkthrough.

Start planning

Get a rough idea of your build

Tell us what you are planning and we will bring real numbers to a free site visit. Every build is priced on its own site conditions, so we quote rather than guess.

What are you building?
120 linear ft
50400 linear ft
Your project

Fence · 120 linear ft

We price fence work for wood, vinyl or chain link set to frost depth, including removal of an old fence where needed.

Rather than show you a number we cannot stand behind, Scott will walk your site and put a written, itemized figure in your hands.

Book a free site visit

No obligation. Your written quote is free.

Questions

Fences questions

It depends on height and location. Many municipalities require a permit once a fence exceeds set heights, commonly around 1.2 metres in a front yard or 2 metres in a rear yard, and fences on a corner lot or bordering a road have extra rules for sight lines. Requirements differ between Spruce Grove, Stony Plain, and the county. We check the bylaw for your property and handle any permit needed.

Fence posts should be set below the frost line so seasonal freezing cannot push them upward. In our region that often means digging around four to six feet, deeper than many homeowners expect, because Alberta has some of the deepest residential frost in the country. Posts set too shallow slowly frost-jack out of the ground over several winters, causing the fence to lean and eventually fail. Proper depth is the difference between a 5-year fence and a 25-year one.

Each has strengths. Pressure-treated wood is affordable, easy to repair, and gives full privacy, but it needs periodic staining to handle our sun and moisture. Vinyl costs more up front but resists rot and needs little maintenance, though quality matters in extreme cold. Chain link is durable and economical when privacy is not the goal. We help you weigh privacy, budget, and upkeep to pick the right fit for your yard.

Fence cost is driven mainly by length, height, and material. Longer runs need more posts, panels, and labour, and taller privacy fences use more material than a low chain link. Vinyl and premium wood cost more than basic pressure-treated or chain link. Terrain matters too, since sloped or rocky ground and hard digging add labour. We measure your property line and give you an itemized quote based on the exact layout you want.

Your fence must sit on your side of the legal property line, and the setback and height rules depend on which yard it is in and your zoning. Building on the wrong line can lead to disputes or forced removal, so we recommend confirming your boundaries, often using your Real Property Report or a survey, before construction. We help you locate the correct line and confirm the bylaw so your fence is placed right the first time.

Most residential fences take a few days to about a week, depending on length, terrain, and material. Setting posts to proper frost depth and letting concrete cure can add time, since posts need to be solid before panels go on. Permit approval, where required, happens before we start. We give you a realistic schedule up front and coordinate around any needed inspections so the job runs smoothly.

Yes. If you are replacing an existing fence, we can remove and haul away the old materials as part of the project. Old posts set in concrete take extra labour to dig out, which we account for in the estimate. Removing the old fence first also lets us check the property line and ground conditions before setting new posts, so the replacement is placed correctly and built to last.

Maintenance depends on material. Wood fences last longest with a fresh coat of stain or sealer every few years to guard against UV fading, cracking, and moisture, plus occasional checks on posts and fasteners. Vinyl and chain link mostly need a wash now and then. After hard winters, check for any posts that have shifted or heaved. Catching a leaning post early is far cheaper than rebuilding a section later.

Explore other services

Visit or call

Haylo Contracting Ltd

  • Spruce Grove, AB
  • (780) 221-5815
  • Monday to Friday, 7:30 AM to 5:00 PM. Closed weekends.
Free Quote

Ready to build with Haylo?

Tell us about your project and we will book a free site visit and prepare a clear, itemized quote. No obligation.